Hydraulic hose and ram on working plant
Hydraulic Supply & Service

Hydraulic Pumps and Power Packs Supplier in Saudi Arabia

Gear and piston pumps, 12V and 24V DC power packs, PTO-driven units and reservoirs.

Pump selection follows the circuit, not the catalogue. External gear pumps in group 1, group 2 and group 3 frame sizes for fixed-displacement duty; axial piston pumps in fixed and variable displacement where the circuit needs pressure compensation or load sensing. Drive interfaces cover SAE A, B and C flange and shaft plus metric mounting to ISO 3019-2, so a replacement lands on the existing bracket.

Power packs are supplied as assembled units — motor, pump, reservoir, relief valve and control block on one base. 12V and 24V DC for mobile and marine duty, three-phase AC for workshop and fixed plant, PTO-driven for truck-mounted equipment. Reservoir capacity, filtration, cooling and valve arrangement are set against your duty cycle. Send a hydraulic schematic and we build to it, or photographs of the existing pack for a like-for-like replacement.

What we supply in this category

14 items. Not listed is not the same as not available — send the requirement and we will tell you honestly.

Group 1, 2 and 3 external gear pumps
Tandem and multi-section gear pumps
Fixed displacement axial piston pumps
Variable displacement piston pumps
Load-sensing and pressure-compensated pumps
Vane pumps and cartridge kits
Hand pumps and foot pumps
12V and 24V DC power packs
Three-phase AC power packs
PTO-driven pump and gearbox units
Steel and polymer hydraulic reservoirs
Bell housings, couplings and drive adapters
Suction strainers, breathers and level gauges
Pump repair kits and drive shafts

Specifications

Gear pumps
External gear, group 1, group 2 and group 3 frame sizes
Piston pumps
Axial piston, fixed and variable displacement, pressure compensated or load sensing
Drive interfaces
SAE A, B and C flange and shaft; metric mounting to ISO 3019-2
DC power packs
12V and 24V DC motor-driven units for mobile and marine duty
AC power packs
Three-phase units for workshop and fixed plant installations
PTO units
Power take-off driven pumps and gearboxes for truck-mounted equipment
Reservoirs
Steel and polymer tanks with breather, level gauge, suction strainer and return filter
Rotation
Clockwise, anti-clockwise and bi-directional options specified at enquiry

Typical applications

  • Tail-lift and tipper power packs on delivery fleets operating from Dammam
  • Workshop press and test bench power units in Al Khobar and Dhahran
  • Deck equipment power packs on port service craft at Ras Tanura
  • Truck-mounted crane and hooklift PTO pump replacement
  • Fixed plant hydraulic supply in Jubail industrial facilities
  • Mobile plant pump replacement identified from the existing mounting pattern

Request a quote for Hydraulic Pumps & Power Packs

Send quantities, specifications or a part number and we will price it. You can attach a requisition, BOQ or drawing.

Attach a list Call