Hydraulic hose and ram on working plant
Hydraulic division

Hydraulic Supply, Components & Repair Services in Saudi Arabia

Hoses, pumps, valves, cylinders and repair support across Saudi Arabia

Hydraulic Supply & Service

What this division covers

We supply hydraulic products, components and technical support for industrial and mobile equipment across Saudi Arabia — hoses and assemblies, pumps, motors, valves, cylinders, filtration and seals.

We repair as well as supply. Send a part number, equipment details, a specification or simply a photograph of the component, and we identify the right hydraulic solution for maintenance, replacement or repair.

Two hose assemblies seen end-on, showing female swivel nuts and coloured seal inserts
Close-up of stainless braided hose sleeve
Brass compression ferrules and olives grouped on a metal tray
Chromed quick-release couplings with colour-coded lines
Machined brass manifold blocks with bored ports and mounting holes
Chromed rod and linkage on industrial plant
Machined component turning under coolant in a workshop
Stainless steel sealing and coupling rings
Products

Hydraulic Supply & Service categories we supply

Each category has its own page listing what we actually supply under it, with specifications and a quote form.

Braided hydraulic hose assemblies with hex swivel fittings

Hydraulic Hoses & Fittings

x

One-wire braid hydraulic hose (S… Two-wire braid hydraulic hose (S… Four-spiral hydraulic hose (EN 8… +12 more
View details
Vessel wheelhouse console showing steering controls and instruments

Hydraulic Steering Systems

Helm pumps, steering cylinders, inboard and outboard kits, autopilot pumps and tie bars.

Front-mount helm pumps Rear-mount helm pumps Helm pumps with integral lock va… +11 more
View details
Hydraulic cylinders and rams on excavator boom and arm

Hydraulic Cylinders

Single acting, double acting and telescopic cylinders, seal kits, and units built to drawing.

Double-acting tie-rod cylinders Single-acting cylinders Welded-body mobile cylinders +11 more
View details
Pump and manifold assembly with pressure gauge

Hydraulic Pumps & Power Packs

Gear and piston pumps, 12V and 24V DC power packs, PTO-driven units and reservoirs.

Group 1, 2 and 3 external gear p… Tandem and multi-section gear pu… Fixed displacement axial piston… +11 more
View details
Stainless valve manifold with pressure gauges

Hydraulic Valves & Controls

Directional control, pressure relief, flow control, manifolds, solenoid and joystick controls.

CETOP 3 (NG6) directional contro… CETOP 5 (NG10) directional contr… Solenoid operated directional va… +12 more
View details
Replacement seal rings grouped ready for fitting

Hydraulic Oils, Filters & Seals

ISO VG 32, 46 and 68 fluids, filter elements, seal kits and O-rings for maintenance programmes.

ISO VG 32 hydraulic oil ISO VG 46 hydraulic oil ISO VG 68 hydraulic oil +13 more
View details
Hydraulic mooring winch drums on a ship deck

Deck & Marine Hydraulics

Hydraulic winches, capstans, windlasses, crane and hatch cylinders, and thruster equipment.

Hydraulic mooring winches Towing and utility winches Anchor windlasses +11 more
View details
Machine tooling and cutting tools set out in a workshop

Hydraulic Tools & Accessories

Jacks, torque wrenches, hand pumps, pressure gauges, crimping machines and puller sets.

Bottle jacks and trolley jacks Low-profile and toe jacks Machine skates and moving systems +13 more
View details
Technician working at a machine in an engineering workshop

Hose Assembly & On-Site Service

Assemblies made up to sample or drawing, crimped and pressure-tested, with on-site hose replacement.

Assemblies made up to sample Assemblies made up to drawing or… One-wire and two-wire braid asse… +11 more
View details
Component set up on a lathe for machining in a workshop

Cylinder Repair & Reseal

Strip, inspect, reseal, rod repair and reassembly, with cylinders reproduced where the original is obsolete.

Strip, clean and inspection report Bore, rod and gland measurement Full reseal with matched seal kit +11 more
View details
Two engineers in protective gear working on equipment in a workshop

Pump & Motor Overhaul

Gear, piston and vane pump and motor overhaul — strip, inspect, replace wear parts, reassemble and test.

External gear pump overhaul Axial piston pump overhaul Variable displacement pump overh… +12 more
View details
Engineers assembling and setting up equipment at a control panel

Power Pack Build & Commissioning

Power packs built to your circuit — pump, motor, reservoir, valving and controls assembled, filled and commissioned.

Power packs built to hydraulic s… Circuit proposed from a descript… 12V and 24V DC mobile power packs +12 more
View details
Engineer in a hard hat rigging equipment on an industrial site

System Service & Breakdown Support

Fluid and filter service, contamination control, fault finding, pressure setting and breakdown attendance.

Hydraulic fluid changes Filter element replacement acros… System flushing after a catastro… +12 more
View details
FAQ

Common questions

Can you make up hydraulic hose assemblies to my length and end fittings?
Yes. Send the hose grade or bore size, the overall length, both end configurations and the orientation between them — or send the old assembly as a sample. Assemblies are crimped and pressure-tested where the specification calls for it.
I only have the failed part, not a part number. Can you still quote?
Usually. Send clear photographs including any casting marks or stamped numbers, the machine make and model, and the overall dimensions. For cylinders and seal kits, bore, rod diameter, stroke and closed length are normally enough to identify a replacement.
Do you supply hydraulic equipment certified by a classification society?
Where the application requires it, we can quote components with certification from ABS, DNV, Lloyd's Register or Bureau Veritas. Tell us the society and the certificate type at enquiry stage, because it affects both the source and the price.
Which areas do you deliver hydraulic parts to?
We work across Saudi Arabia. Our address is in Al Khobar, and we supply Dammam, Dhahran, Jubail and Ras Tanura alongside Riyadh, Jeddah and other regions of the Kingdom.
Can you supply an equivalent if the original brand is not available?
Yes, and we will say plainly that it is an equivalent rather than presenting it as the original. We quote the interchange standard — hose grade, mounting pattern, seal compound — so your engineer can approve or reject the substitution.
Do you handle bulk or project requirements as well as single spares?
Both. Send a bill of quantities or a requisition and we price it line by line. The quote form on this site accepts file uploads, so a BOQ, requisition or drawing can be attached directly.
Request a quote

Send us a hydraulic supply & service requirement

Attach a requisition, bill of quantities, drawing or photograph and we will quote against it — line by line, with anything unavailable marked clearly.

WhatsApp
Usually the fastest way to reach us.

We reply by email and WhatsApp.

Attach a list Call