Hydraulic hose and ram on working plant
Hydraulic Supply & Service

Hydraulic Power Pack Build and Commissioning in Saudi Arabia

Power packs built to your circuit — pump, motor, reservoir, valving and controls assembled, filled and commissioned.

We build hydraulic power units to the circuit you need: pump and drive selected for the flow and pressure the work actually requires, reservoir sized for the duty cycle and the heat it has to shed, relief and control valving arranged to the schematic, with the filtration, instrumentation and cooling that keep it alive. Send a schematic and we build to it; describe the duty and we propose a circuit first.

Reservoir sizing matters here. A tank sized by a temperate-climate rule of thumb runs hot in a Saudi summer, and hot oil is the fastest route to seal and pump failure. Units are assembled, filled with the specified fluid, flushed, function tested and commissioned, with relief settings recorded. We also rebuild and re-commission existing packs from photographs and nameplate details.

What we supply in this category

15 items. Not listed is not the same as not available — send the requirement and we will tell you honestly.

Power packs built to hydraulic schematic
Circuit proposed from a description of the duty
12V and 24V DC mobile power packs
Three-phase AC workshop and fixed plant units
PTO-driven truck-mounted units
Pump and drive selection for flow and pressure
Reservoir sizing for duty cycle and heat rejection
Relief, control and directional valving assembly
Manifold blocks drilled to circuit
Filtration and breather specification
Cooling and heat exchanger provision
Gauges, switches and instrumentation
Filling, flushing and function testing
Commissioning with relief settings recorded
Rebuild and re-commissioning of existing packs

Specifications

Build to
Your hydraulic schematic, or a circuit we propose from the duty description
Drive options
12V and 24V DC, three-phase AC, PTO and engine driven
Reservoir
Sized for duty cycle and heat rejection in local ambient conditions
Valving
Relief, directional and control valving assembled to the circuit
Filtration
Suction, pressure and return filtration specified with the build
Instrumentation
Gauges, level and temperature indication, pressure switches
Commissioning
Filled, flushed, function tested, relief settings recorded
Existing units
Rebuild and re-commissioning quoted from photographs and nameplate

Typical applications

  • Purpose-built machinery needing a power unit matched to its circuit
  • Truck-mounted equipment requiring a PTO-driven pack
  • Workshop presses and test rigs in Dammam and Al Khobar
  • Fixed plant hydraulic supply in Jubail industrial facilities
  • Replacement of an aged pack where the original is no longer available
  • Marine deck equipment power units for vessels working from Ras Tanura

Request a quote for Power Pack Build & Commissioning

Send quantities, specifications or a part number and we will price it. You can attach a requisition, BOQ or drawing.

Attach a list Call