Technical Guides for Industrial Buyers and Site Teams
Practical guidance on what we supply and the work we carry out. Written for whoever raises the requisition.
How to identify a hydraulic fitting on a hose you already have
The wrong end, not the wrong hose, is the most common reason a replacement assembly does not fit. Here is how to identify what you are actually holding.
What a hot work permit actually stops you doing
A welding crew can arrive at 06:00 and not strike an arc until 11:00. This is what the permit is actually checking, and what a client can prepare to collapse the delay.
Hydraulic breakdown on site: what actually controls response time
Almost none of the delay on an urgent hydraulic call is driving time. Here is what actually sits between the phone call and the arc, and what you can prepare to shorten it.
Reseal, rebuild or replace: how a cylinder repair is scoped
A leaking cylinder is not automatically a reseal. What the strip-down finds on the rod, the bore and the gland decides which of three very different jobs you are buying.
How to scope a steel fabrication and welding job
A vague fabrication enquiry can only be guessed at. Here is what belongs in the scope — grade, weld standard, inspection, coating and site access — before it goes out.
PPE requirements on Saudi industrial sites
Which standards actually get specified on Saudi sites, how to read the markings on the equipment, and how to build an issue list that passes inspection.
What a ship chandler actually supplies, and how to order
A practical explanation of what falls inside a chandler's scope, what does not, and how to write a requisition that gets a complete quote first time.
How to choose the right hydraulic hose for your application
Pressure rating is only one of six things that decide whether a hose lasts. Here is how to specify one properly, and the shortcuts that cause early failures.
Have a question these do not answer?
Send it with your enquiry. We would rather answer a detailed technical question than guess at a vague one.